Omron ZX-E - Page 91

89
ZX-E
Operation Manual
Section 5 Comparing Measured Values (Previous Value Comparisons)
Section 5
DETAILED SETTINGS
Moving to COMP
3. Press the UP or DOWN Key.
The sub-display will flash.
4. Use the UP and DOWN Keys to display SET
or ALL.
5. Press the ENT Key.
6. Use the LEFT and RIGHT Keys to display
COMP on the main display.
Setting Previous Value Comparison
7. Press the UP or DOWN Key.
The sub-display will flash.
8. Use the UP and DOWN Keys to display ON.
9. Press the ENT Key to confirm the setting.
The previous value comparison function can now be
used.
Z166-E1-02A.book Page 89 Friday, June 3, 2005 4:18 PM