Repair:
If
the choke fails
to
operate, check to see
if
the heating element is working. If
it
is, the choke
cover should become hot after a few minutes
of
engine operation.
If
the
cover
does
not get
hot,
check for current at the cover terminal. The engine
must be running. Trace down any opens or shorts.
Remove the choke cover to inspect the heating ele-
ment and
coil.
Seethat the element
is
not burned out
or broken. The bi-metal coil must not be damaged,
dragging in the housing,
or
have an improperly
directed spiral.
When installing a new coil, maintain the original
direction
of
spiral inward from the fastening screw.
Besurethe coil setssquarely in the housing
so
itwill
not bind. Coil should not touch inside
of
choke
body.
..
.
25
Redistribution or publication of this document
by any means, is strictly prohibited.
Redistribution or publication of this document
by any means, is strictly prohibited.
To Next Page
Loading...
Need help?
General
