Appendix
Version 1.0.4 - 2020-08-04 107Translation of original instruction
MT60 EN
MT60_GB_appendix.fm
9.9 Terminology/Glossary
Term Explanation
Cross table Supporting surface, clamping surface for the workpiece with traverse in X
and Y directions
Taper mandrel Tool housing taper, drill taper, drill chuck taper.
Workpiece piece to be milled, drilled or machined.
Draw bar Threaded rod to fix the taper mandrel in the quill.
Drill chuck Drill bit adapter
Collet Holder for end mill
Drill-mill head Upper part of the milling machine
Quill Hollow shaft in which the milling spindle turns.
Milling spindle Shaft activated by the motor
Drilling table Supporting surface, clamping surface
Taper mandrel Cone of the drill or of the drill chuck
Spindle sleeve lever Manual operation for the drill feed
Quick action -
Drill chuck
Drill bit adapter can be fixed by hand.
Tool Milling cutter, drill bit, etc.
To Next Page
Loading...
