Safety
Version 1.0.4 - 2020-08-046 Translation of original instruction
MT60
EN
MT60_GB_1.fm
1 Safety
This part of the operating instructions
explains the meaning and use of the warning notes included in these operating instructions,
defines the intended use of the milling machine,
points out the dangers that might arise for you or others if these instructions are not
observed,
informs you about how to avoid dangers.
In addition to these operation instructions, please observe
the applicable laws and regulations,
the statutory provisions for accident prevention,
the prohibition, warning and mandatory signs as well as the warning notes on the milling
machine.
Always keep this documentation close to the milling machine.
1.1 Glossary of symbols
provides further instructions
calls on you to act
listings
1.2 Rating plate
To Next Page
Loading...
