Optimum OPTImill MT 60 - 2 Technical Specification; Electrical Connection; Vertical Spindle

Technical specification
Version 1.0.4 - 2020-08-0418 Translation of original instruction
MT60
EN
MT60_GB_2.fm
2 Technical specification
The following information represents the dimensions and indications of weight and the manu-
facturer‘s approved machine data.
2.1 Electrical connection
Total connection 3 x 400V ~ 50Hz (60 Hz)
Fusing performed by the operator 16 A
2.2 Vertical spindle
Drive motor 2.2 kW
Speed 90 - 2000 rpm
Gear stages 8
Spindle seat ISO 40 DIN 2080
Draw bar M16
Spindle sleeve travel [mm] 120
Throat [mm] 220 - 600
Distance spindle - table [mm] 125 -465
Quill diameter [mm] 90
Inclination of milling head ± 45°
Automatic spindle sleeve feed [mm/rev] 0.08 │ 0.25 │ 1
Automatic shut-off spindle sleeve feed [mm] 10 - 120
Ø 44.45
16.1
10
max. 22.5
1.6
M16
32
93.4
Ø 25.3
Ø 63