WARNING
Equipment classification
Electrical Shock Protection - Class 1 Equipment
Type B - relates to the allowable maximum leakage current which can flow from the
applied part. The limits for this are defined in IEC/EN 60601.
The applied parts are the face pad, eye piece and hand grips.
Medical device. Continuous operation.
Do NOT open the scan head covers. There are no user serviceable or replaceable parts
inside.
DoNOT plug the scan head into a power block or powered table. The scan head must be
plugged directly into a wall socket.
Do NOT disconnect or connect the touch screen while the scan head is in use.
To prevent electric shock:
l Only use cables supplied by Optos.
l
Cables should NOT be extended or altered.
l Mains supply must be earthed.
l The device may only be serviced by Optos trained personnel.
l Care must be taken never to touch exposed parts of the device while in physical
contact with a patient.
If the mains cable is damaged do not use the system and contact your Optos
representative, see Contact us on page59.
The image server, switch, browser-based review clients and any Viewing PCs or monitors
must be positioned outside the patient environment; more than 1.5 meters (5 ft) from the
scan head.
Do NOT connect any peripherals to the scan head. Only use peripherals supplied with the
device. Independently sourced peripherals may NOT be compatible. Contact your Optos
representative for more information on compatible peripherals, see Contact us on page59.
CAUTION
Ordinary equipment (IP2X), without protection against ingress of water.
You must regularly inspect the equipment. If there is any damage please contact your
Optos representative, see Contact us on page59.
Ensure the mains socket is easily accessible.
To Next Page
Loading...
