Chapter 1 - Warningsand cautions
1.11 Symbol and label information
Symbol and label information
Switch - OFF position.
Switch - ON position.
Protective earth terminal.
Danger: high voltage warning.
WARNING
Warnings are directions which, if NOT followed, could cause:
l Fatal or serious injury to a user, engineer, patient or any other person.
l Damage to the equipment described in this manual and/or other equipment or goods.
l Environmental pollution.
CAUTION
Cautions are directions which, if NOT followed, could cause:
l A hazardous situation for a user, engineer, patient or any other person.
l Damage to the equipment or loss of data.
Interference may occur in the vicinity of equipment marked with this symbol.
Laser device present. This symbol is used internally. Only Optos trained personnel are
permitted to service the device. Under normal use, operators should never see this symbol.
Date of manufacture.
Manufacturer.
Type B - relates to the allowable maximum current leakage which can flow from the applied
part. The limits for this are defined in IEC 60601.
Serial Number.
In accordance with Directive 93/42/EEC.
Consult accompanying documents.
Disposal in compliance with WEEE Directive.
Part Number: G102748/9GSE Page 19 of 65
Copyright 2017, Optos plc. All rights reserved. English
To Next Page
Loading...
