Deleting a Saved Configuration (CLI)
Deleting a Saved Configuration (CLI)
Use the following procedure to delete a saved configuration.
To delete a saved configuration, use the following CLI command and specify the
universal unique identifier for the backup:
hostname:maintenance system configs> destroy cb2f005f-cf2b-608f-90db-fc7a0503db2a
Are you sure you want to delete the saved configuration "new"? y
hostname:maintenance system configs>
Exporting a Saved Configuration (BUI)
Use the following procedure to export a saved configuration. You can also use the export
function to export the file to a share on the appliance itself, that has the HTTP or FTP protocol
enabled for writing. You can enter a username and password for authentication to the remote
server if one is required.
1.
Go to Maintenance > System.
2.
Mouse over the configuration list entry you wish to export and click the
download icon .
3.
Your browser prompts you to save the file locally. The file is a compressed
archive whose contents are versioned and may vary over time. You should not
attempt to unpack or modify the content of the archive, and doing so renders it
unable to be imported back to the appliance successfully.
Exporting a Saved Configuration (CLI)
Use the following procedure to export a saved configuration. You can also use the export
function to export the file to a share on the appliance itself, that has the HTTP or FTP protocol
enabled for writing. You can enter a username and password for authentication to the remote
server if one is required.
To export a saved configuration, use the following CLI command and specify the
universal unique identifier for the backup:
hostname:maintenance system configs> export cb2f005f-cf2b-608f-90db-fc7a0503db2a
Backing Up the Configuration 313
To Next Page
Loading...
Need help?
General