Upgrading Software on a Standalone Controller (CLI)
version = 2013.06.05.4.0,1-1.6
date = 2015-04-21 02:38:15:45
status = waiting
update_zfs_upgrade = deferred
hostname:maintenance system updates ak-nas@2013.06.05.4.0,1-1.6> set
update_zfs_upgrade=onreboot
update_zfs_upgrade = onreboot
hostname:maintenance system updates ak-nas@2013.06.05.4.0,1-1.6>
5.
After you set any properties, enter the upgrade command and then enter y to start
the update.
hostname:maintenance system updates> select ak-nas@2013.06.05.4.0,1-1.7-nd
hostname:maintenance system updates ak-nas@2013.06.05.4.0,1-1.7-nd> upgrade
The selected software update requires a system reboot in order to take effect.
The system will automatically reboot at the end of the update process. The
update will take several minutes. At any time during this process, you can
cancel the update with [Control-C].
Are you sure? (Y/N) y
Updating from ... ak/nas@2013.06.05.4.0,1-1.6
Backing up smf(5) ... done.
Loading media metadata ... done.
Selecting alternate product ... SUNW,iwashi
Installing Sun Storage 7120 2013.06.05.4.0,1-1.7
pkg://sun.com/ak/SUNW,iwashi@2013.06.05.4.0,1-1.7:20091014T084500Z
Creating system/boot/ak-nas@2013.06.05.4.0,1-1.7 ... done.
Creating system/root/ak-nas@2013.06.05.4.0,1-1.7 ... done.
...
As the update proceeds, the latest message is printed. You can cancel the update at any time by
pressing Control-C and confirming your action:
Updating from ... ak/nas@2013.06.05.4.0,1-1.6
Backing up smf(5) ... done.
Loading media metadata ... ^C
This will cancel the current update. Are you sure? (Y/N) y
error: interrupted by user
hostname:maintenance system updates ak-nas@2013.06.05.4.0,1-1.7-nd>
326 Oracle ZFS Storage Appliance Customer Service Manual • July 2016
To Next Page
Loading...
Need help?
General