Oracle SPARC T5-4 Installation Guide

Assigning a Static IP Address to the SP
78 SPARC T5-4 Server Installation Guide • July 2015
Parameter Description
Confirm Review the onscreen information and change it if needed. Otherwise, continue.
Name Service Select the name service according to your network environment.
If you select a name service other than None, you will be prompted for additional name service configuration
information.
NFSv4 Domain Name
Select the type of domain name configuration according to your environment. If you are not sure, select Use the
NFSv4 domain derived by the system.
Time Zone
(Continent)
Select your continent.
Time Zone (Country
or Region)
Select your country or region.
Time Zone Select the time zone.
Date and Time Accept the default date and time or change the values.
root Password
Type the root password twice. This password is for the superuser account for the Oracle Solaris OS on this
server. This password is not the SP password.
Related Information
■
Oracle Solaris OS documentation
■
“Configure the Preinstalled OS” on page 72
■
“Reach a State to Install a Fresh OS (Oracle ILOM CLI)” on page 73
■
“Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)” on page 75
Assigning a Static IP Address to the SP
If your network does not use DHCP, the NET MGT port is not operational until you configure
network settings for the SP.
Note - If you are unable to use DHCP on your network, you must connect to the ILOM SP
using the SER MGT port to configure the NET MGT port for your network. See “Assign a
Static IP Address to the NET MGT Port” on page 80.
■
“Log In to the SP (SERMGT Port)” on page 79
Related Information
■
“Oracle ILOM System Console” on page 71
■
“Oracle Solaris OS Configuration Parameters” on page 77
■
“Log In to the SP (SERMGT Port)” on page 79

Oracle SPARC T5-4 Specifications

General

Brand	Oracle
Model	SPARC T5-4
Category	Server
Language	English