Log In to the SP (SERMGT Port)
Powering On the Server for the First Time 79
■
“Assign a Static IP Address to the NET MGT Port” on page 80
Log In to the SP (SERMGT Port)
After the SP boots, access the ILOM CLI to configure and manage the server. The ILOM CLI
prompt (->) is displayed the first time the SP is booted. The default configuration provides an
ILOM CLI root user account. The default root password is changeme. Change the password
using the SP ILOM CLI password command.
1.
If this is the first time the server has been powered on, use the password
command to change the root password.
hostname login: root
Password:changeme ( nothing
displayed)
Last login: Mon Feb 18 16:53:14 GMT 2013 on ttyS0
Detecting screen size; please wait...done
Oracle(R) Integrated Lights Out Manager
Version 3.2.1.2 rxxxxx
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
Warning: password is set to factory default.
-> set /SP/users/root password
Enter new password: ********
Enter new password again: ********
->
Note - After the root password has been set, on subsequent reboots, the ILOM CLI login
prompt is displayed.
2.
Type root for the login name, followed by your password.
...
hostname login: root
Password: ******** ( nothing
displayed)
Oracle(R) Integrated Lights Out Manager
Version 3.2.1.2
To Next Page
Loading...
Need help?
General