Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)
Powering On the Server for the First Time 75
boot net - boot kernel from network
boot cdrom - boot kernel from CD-ROM
boot disk1:h - boot from disk1 partition h
boot tape - boot default file from tape
boot disk myunix -as - boot myunix from disk with flags "-as"
dload <filename> ( addr -- ) debug load of file over network at address
Examples:
4000 dload /export/root/foo/test
?go - if executable program, execute it
or if Forth program, compile it
Related Information
■
“Configure the Preinstalled OS” on page 72
■
“Reach a State to Install a Fresh OS (Oracle ILOM CLI)” on page 73
■
“Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)” on page 75
■
“Assign a Static IP Address to the NET MGT Port” on page 80
Reach a State to Install a Fresh OS (Oracle ILOM
Web Interface)
If you do not plan to use the preinstalled OS, use this procedure to prevent the server from
booting from the preinstalled OS.
1.
Prepare the appropriate boot media according to your installation method.
There are many methods by which you can install the OS. For example, you can boot and install
the OS from DVD media or from another server on the network.
For more information about the methods, refer to these Oracle Solaris document sections:
■
Installing Oracle Solaris 11 Systems, comparing installation options at:
http://www.oracle.com/goto/Solaris11/docs
■
Oracle Solaris 10 Installation Guide: Planning for Installation and Upgrade, choosing an
Oracle Solaris installation method at:
http://www.oracle.com/goto/Solaris10/docs
2.
If you have not done so, perform these tasks to access the Oracle ILOM web
interface on the server:
a.
In a browser on the same network as the system, type the IP address of the
SP.
b.
Log in to Oracle ILOM by typing your user name and password.
To Next Page
Loading...
Need help?
General