Orban OPTIMOD 8685 User Manual

OPTIMOD SURROUND PROCESSOR INSTALLATION
2-75
b) Click the “General” tab.
c) Select the device you set up in step (i)
on page 2-73. This will usually be
“Communications cable between
two
computers (COM1).”
d) Click “Configure.”
e) Set the “Maximum Speed (bps)” to
115200.
f) Check “Enable hardware flow con-
trol.”
g) Make sure all other hardware features
are unchecked.
h) Click “OK.”

Orban OPTIMOD 8685 Specifications

General

Brand	Orban
Model	OPTIMOD 8685
Category	Computer Hardware
Language	English