EasyManua.ls Logo

Oriental motor BLH Series - 18 Specifications; General Specifications

Oriental motor BLH Series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
145
Specications
18 Specications
18.1 Specications
The value in a state where the gearhead is not combined is described in each specication for the "rated torque," "peak
torque," "rated rotation speed" and "speed control range." Refer to "4.4 Products possible to combine" (p.7) for the
motor model name.
For the lead wire type, "
KC
" of the motor model are replaced by "
K
".
Model
Motor
BLHM015K-
oo
BLHM230KC-
oo
BLHM230KCM-
oo
BLHM450KC-
oo
BLHM450KCM-
oo
Driver
BLH2D15-KR BLH2D30-KR BLH2D50-KR
Rated output power (Continuous) 15 W 30 W 50 W
Power supply
input
Rated voltage 24 VDC
Permissible voltage range −10 to +10%
Rated input current 0.93 A 1.9 A 2.9 A
Maximum input current 2.3 A 4.1 A 5.4 A
Rated torque 0.048 N·m (6.8 oz-in) 0.115 N·m (16.3 oz-in) 0.191 N·m (27 oz-in)
Peak torque 0.072 N·m (10.2 oz-in) 0.173 N·m (24 oz-in) 0.287 N·m (40 oz-in)
Rated rotation speed 3000 r/min 2500 r/min
Speed control range (80
*
) 100 to 3000 r/min
*
Digital setting
Check on the Oriental Motor Website for the product specications.
18.2 General specications
Operating
environment
Ambient
temperature
Driver: 0 to +50 °C [+32 to +122 °F] (non-freezing)
Ambient
humidity
85% or less (non-condensing)
Altitude Up to 1000 m (3300 ft.) above sea level
Surrounding
atmosphere
No corrosive gas, dust.
Cannot be used in radioactive materials, magnetic eld, vacuum or other special environment.
(Details about the installation location are described on p.9.)
Vibration
Not subject to continuous vibrations or excessive impact.
In conformance with JIS C 60068-2-6 "Sine-wave vibration test method"
Frequency range: 10 to 55 Hz
Pulsating amplitude: 0.15 mm (0.006 in.)
Sweep direction: 3 directions (X, Y, Z)
Number of sweeps: 20 times
Storage
environment
Shipping
environment
Ambient
temperature
Driver: −25 to +70 °C [−13 to +158 °F] (non-freezing)
Ambient
humidity
85% or less (non-condensing)
Altitude Up to 3000 m (10000 ft.) above sea level
Surrounding
atmosphere
No corrosive gas, dust. water or oil.
Cannot be used in radioactive materials, magnetic eld, vacuum or other special environment.
Degree of protection IP00

Table of Contents

Other manuals for Oriental motor BLH Series

Related product manuals