124
How to use MEXE02
13.4 Monitor
Unit information monitor
The unit information monitor is provided in the
MEXE02
.
If this monitor function is used, the driver information such as the number of times the main power supply is turned on
and the cumulative time of power-on in addition to the product information such as the product name can be checked.
The set values of parameters related to operation or communication can also be checked.
1. Start "Unit information monitor."
2. Click "Start the Unit information monitor."
The unit information monitor starts.
3. To exit the unit information monitor, unselect "Start the Unit information monitor."
z
How to view the unit information monitor window
Area Item Description
①
Product information area
Driver information area
Driver user name A desired name can be given with the "Driver user name" parameter.
Product name Monitors the driver model being connected to the
MEXE02
.
Main power count
Monitors the number of times that the main power supply of the
driver is turned on.
Main power supply time
Monitors the cumulative time that has elapsed since the main power
supply was turned on rst time.
②
IF setting area
Address number setting switch
(ID)
Monitors the switch setting state.
③
Communication function
setting area
Communication parameters
Monitors the descriptions of communication parameters set in the
driver.
④
Driver setting value area Driver parameters Monitors the parameter values set in the driver.
The setting values are shown in the communication parameters and driver parameters of the unit information
monitor. If the setting value is changed, the value in the monitor screen changes immediately, but it has not written in
the driver.
Check the update timing of each parameter and update the parameter value in the driver.
1
2
3
4
To Next Page
Loading...
