147
Regulations and standards
19 Regulations and standards
19.1 UL Standards, CSA Standards
This product is recognized by UL under the UL and CSA Standards.
Applicable Standards Certication body/Standards File No.
UL 62368-1
CSA C22.2 No.62368-1
UL/E208200
19.2 EU Directives
CE Marking
This product is axed the CE Marking under the EMC Directive.
z
Low Voltage Directives
•
This product is not subject to the coverage of the Low Voltage Directive because the input power supply voltage is
24VDC.
•
When conforming the equipment incorporating this product to the Low Voltage Directive, connect the driver power
supply input to the DC power supply where the primary and secondary sides are provided with reinforced insulation.
•
Install this product inside an enclosure because it is designed and manufactured to be incorporated in equipment.
•
Degree of protection for driver: IP00
z
EMC Directive
This product has received EMC compliance under the conditions specied in "Example of installation and wiring" on
p.18. The nal level of conformance of your mechanical equipment to the EMC Directive will vary depending on such
factors as the control system equipment used with the motor and driver, conguration of electrical parts, wiring, layout
and hazard level. It therefore must be veried through conducting EMC measures on your mechanical equipment.
Applicable standards
EMI
EN 55011 Group 1 Class A
EN 61000-6-4
EMS EN 61000-6-2
Caution: This equipment is not intended for use in residential environments nor for use on a lowvoltage public network
supplied in residential premises, and it may not provide adequate protection to radio reception interference in
such environments.
19.3 Republic of Korea, Radio Waves Act
KC Mark is axed to this product under the Radio Waves Act, the republic of Korea.
19.4 RoHS Directive
The products do not contain the substances exceeding the restriction values of RoHS Directive (2011/65/EU).
To Next Page
Loading...
