Oriental motor BLH Series - 4 Preparation; Checking the Product; How to Identify the Product Model; Information about Nameplate

7
Preparation
4 Preparation
This chapter explains the items you should check, as well as the name and function of each part.
4.1 Checking the product
Verify that the items listed below are included.
Report any missing or damaged items to the branch or sales oce from which you purchased the product.
Refer to "4.4 Products possible to combine" for combinations of the driver and motor.
□
Driver .................................................1 unit
□
OPERATING MANUAL ................... 1 copy
4.2 How to identify the product model
BLH2D 30 - K R
①②③ ④
①
Driver type
BLH2D
:
BLH
Series driver
②
Output power
15
: 15 W
30
: 30 W
50
: 50 W
③
Power supply voltage
K
: 24 VDC
④
R
: RS-485 communication type
D
: Digital setting type Blank: Analog setting type
4.3 Information about nameplate
Serial number
Manufacturing date
Driver model
Driver specications
4.4 Products possible to combine
Products with which the drivers can be combined are listed below.
Verify the driver model and the motor model against the model name described on the nameplate of the product.
The box (
o
) in the motor model name indicates a code or a number representing the gear ratio, the shaft type, or the
gearhead type.
For details about the motor, refer to the operating manual included with the motor.
Output power Motor model Driver model Cable set model
15 W
BLHM015K-
oo
BLH2D15-KR
LHS003CC
or
LHS010CC
30 W
BLHM230KC-
oo
*

BLHM230KCM-
oo
BLH2D30-KR
50 W
BLHM450KC-
oo
*

BLHM450KCM-
oo
BLH2D50-KR
*
For the lead wire type, "
KC
" of the motor model are replaced by "
K
".
z
Cable set
(Each cable can be purchased separately.)
•
I/O signal cable ........................ 1 pc
•
Power supply cable ................ 1 pc
Length Cable set model I/O signal cable Power supply cable
300 mm (11.8 in.)
LHS003CC LH003C3 LH003C1
1000 mm (39.4 in.)
LHS010CC LH010C3 LH010C1