20
Operation data
7.2 Setting the rotation speed
Setting method
Digital External analog setting device/PWM signal input
Host
controller
0 to 5 VDC
1 mA or more
MEXE02
or RS-485 communication External potentiometer External DC voltage PWM signal
The setting method for each operation data number can be changed using the
MEXE02
or RS-485 communication.
If the external analog setting device/PWM signal input is selected in the setting method, set whether to set the
operation data with the external analog setting device (external potentiometer, external DC voltage) or the PWM signal
input using the "External setting method" parameter.
Refer to p.35 when setting the upper limit and the lower limit of the rotation speed.
Digital setting
Setting range: 0, 80 to 3150 r/min
(Factory setting: 0 r/min)
[
MEXE02
Setting window of rotation speed]
To Next Page
Loading...
