Oriental motor BLH Series - Page 42

42
Parameter
A: Update immediately
Parameter name Description Setting range
Factory
setting
Update
INFO action (Driver temperature information
(INFO-DRVTMP))
Sets the INFO output
and LED status when
corresponding information
is generated.
This does not aect the
bit output status of each
information.
0: INFO action is not applied
Information bit output: Applied
• INFO output: Not applied
• LED: Not applied
1: INFO action is applied
Information bit output: Applied
• INFO output: Applied
• LED: Applied
1 A
INFO action (Overvoltage information (INFO-
OVOLT))
INFO action (Undervoltage information (INFO-
UVOLT))
INFO action (Load information (INFO-LOAD))
INFO action (Speed information (INFO-SPD))
INFO action (Operation data setting error
information (INFO-SET-E))
INFO action (Operation prohibited information
(INFO-DRV))
INFO action (RS-485 communication error
information (INFO-NET-E))
INFO action (Rotation amount meter information
(INFO-REV))
INFO action (Tripmeter information (INFO-TRIP))
INFO action (Odometer information (INFO-ODO))
INFO action (Torque limiting value setting error
information (INFO-TRQ-DE))
INFO action (Rotation speed setting error
information (INFO-SPD-DE))
INFO action (Main power supply time
information (INFO-PTIME))
INFO action (Main power supply count
information (INFO-PCOUNT))
INFO action (Operation start limit mode
information (INFO-DSLMTD))
INFO action (I/O test mode information (INFO-
IOTEST))
INFO action (Conguration request information
(INFO-CFG))
INFO action (Power cycling request information
(INFO-RBT))