47
Parameter
A: Update immediately
Parameter name Description
Setting
range
Factory setting Update
Indirect reference address setting (0)
Sets the ID of data to be
stored in the indirect
reference address (0) to
the indirect reference
address (31).
0 to 65535
(0 to FFFFh)
576: Operation data No.0 rotation speed
A
Indirect reference address setting (1) 896: Operation data No.0 torque limiting value
Indirect reference address setting (2) 768: Operation data No.0 acceleration time
Indirect reference address setting (3) 832: Operation data No.0 deceleration time
Indirect reference address setting (4) 62: Driver input command
Indirect reference address setting (5) 98: Selection number
Indirect reference address setting (6) 103: Feedback speed
Indirect reference address setting (7) 108: Load factor
Indirect reference address setting (8) 63: Remote output
Indirect reference address setting (9) 64: Present alarm
Indirect reference address setting (10) 123: Information
Indirect reference address setting (11) 124: Driver temperature
Indirect reference address setting (12) 163: Inverter voltage
Indirect reference address setting (13) 157: Rotation amount meter
Indirect reference address setting (14) 127: Tripmeter
Indirect reference address setting (15) 126: Odometer
Indirect reference address setting (16) 160: Main power supply time
Indirect reference address setting (17) 161: Main power supply count
Indirect reference address setting (18) 184: I/O status 1
Indirect reference address setting (19) 185: I/O status 2
Indirect reference address setting (20) 186: I/O status 3
Indirect reference address setting (21) 187: I/O status 4
Indirect reference address setting (22) 188: I/O status 5
Indirect reference address setting (23) 189: I/O status 6
Indirect reference address setting (24) 190: I/O status 7
Indirect reference address setting (25) 191: I/O status 8
Indirect reference address setting (26) 0: Not used
Indirect reference address setting (27) 0: Not used
Indirect reference address setting (28) 0: Not used
Indirect reference address setting (29) 0: Not used
Indirect reference address setting (30) 0: Not used
Indirect reference address setting (31) 0: Not used
To Next Page
Loading...
