Component Task Prior to
every use
Weekly Monthly
Check for external damage XLights
Verify functionality X
Check that the control device is functioning properly
(inform qualified personnel of any error messages on
the control panel)
X
Check that the battery charger is functioning properly
(inform qualified personnel of any LED error messages)
X
Electronics
Check plug connections X
With brake disengaged: check whether the indicator on
the control panel is flashing
XBrake
With brake engaged: check the braking function by try
ing to push the chair
X
Visually inspect all moving components and cabling for
damage
XSeat adjustment
functions
Check that screw connections are tight X
Check that mounting screws are fastened properly X
Check whether screw connections between the arm
support and the control panel are tight
X
Side panel and
arm support
Check arm support for damage X
Gas compression
spring or actuator
Visual inspection for scratches and oil leaks on the pis
ton rod
X
Product Check the legibility and completeness of all labels and
markings on the product
X
Only with a suspension caster fork
Component Task Prior to
every use
Every six
months
Annually
Suspension caster
fork
Inspect the polyurethane spring element for
cracks/deformation
X
1
X
1
Only when operating under difficult conditions (e.g.frequently driving on cobblestones).
8.2 Repair
WARNING
Prohibited repairs
Severe user injuries, damage to the product due to adjustment and installation errors
► Only carry out the repairs described in this section. All other repairs may only be carried out by the qualified
personnel.
8.2.1 Replacing a defective fuse
INFORMATION
When replacing, only use fuses of the same type. Note the printed rating.
To replace a fuse: see page17.
Should the fuse burn out repeatedly after a short time for no discernible reason, contact the qualified personnel.
8.2.2 Replacing defective lights
NOTICE
Use of incorrect bulbs
Damage/melting of the connecting cables due to excess current flow
► Note that the LED lighting may only be replaced with original lighting.
The LED lighting is maintenance-free. If repairs are required, the qualified personnel who fitted or delivered the
wheelchair can help.
105490E75=1_C
Maintenance and repair
To Next Page
Loading...
Need help?
General
