Otto Bock 490E75 1 C Series User Manual

[Diagnostics] menu item
For qualified personnel only.
[Exit] menu item
Exit the Settings menu by moving the joystick to the right. The display switches to the first driving profile.
7.6.4.5 Environmental control via Bluetooth
NOTICE
Use of devices with electromagnetic emissions
Restriction of function due to electromagnetic fields
► The performance of the product can be affected by electromagnetic fields (highly radiating devices such as
amateur radio or superimposed frequencies). If necessary, switch such devices off while using this product.
40
PCs (Windows) and tablets/smartphones (iOS devices;
devices with Android 4.0 or higher) can be operated in
"Bluetooth Devices" mode.
The signals of installed input devices (suchas a joy
stick, navigation buttons on the TEN°LCD module,
special control input device) are used to control the
device/mouse functions.
7.6.4.5.1 Activating devices
Before a connection to a Bluetooth device can be established, the device registration must be activated on the
TEN° control panel or TEN°LCD module.
INFORMATION
Only activated device registrations are displayed in "Bluetooth Device" mode.
LCD screen in "Settings" menu
Display Information
TEN° control panel: Open the "Settings" menu by pressing and holding the [Warn
ing flashers on/off] button and choose the [Bluetooth] item.
TEN°LCD module: Open the "Settings" menu by pressing the [Settings] button and
choose the [Bluetooth] item.
Navigate in the menu using the respective installed input device (e.g.joystick, navig
ation buttons on the TEN°LCD module, special control input devices):
• Scroll through the list: move forward/back
• Select entry: move to the right
A list of preprogrammed device names and their respective activation status [On/Off]
is displayed. Standard device names are PC, phone, iPhone and iPad. The names
can be adjusted by the qualified personnel as desired.
Select an appropriate device name for the device being activated.
Set the activation status by moving right to <On> in the menu.
Select [Exit] and return to the [Bluetooth] item by moving to the right in the menu.
Select [Exit] again and leave the settings by moving to the right in the menu.
Press the [On/Off] button to turn the control device off. Then restart the control
device (several times if necessary).
47490E75=1_C
Use

Otto Bock 490E75 1 C Series Specifications

General

Brand	Otto Bock
Model	490E75 1 C Series
Category	Wheelchair
Language	English