Otto Bock 490E75 1 C Series User Manual

Pressing the button one more time returns to driving mode (seat function LED display is not lit).
[Seat function 1/2] LED display
This LED display shows the currently active additional power function.
[Select speed level] button
Pressing the button increases/decreases the speed level. The acoustic signal changes when the maximum speed
level is reached.
[Selected speed level] LED display
The LEDs show the currently selected speed level (1-5).
7.15.1.2 R-Net attendant control
The power wheelchair has been equipped with a separate control panel for attendant operation. The separate con
trol panel is height-adjustable and removable.
Functional overview
The attendant uses the attendant control to operate the driving function and the power seat functions.
The module is connected in conjunction with the control panel or as a separate input device.
The module is connected in combination with the TEN°LCD module and the special control (if any).
1 Joystick
2 [Activate/deactivate attendant control] button
3 [Attendant control active] LED display (green
LED display)
4 [Primary control active] LED display (red LED
display)
5 [Mode] button
6 [Select speed level] button
MODE
75
7 [Selected speed level] LED display
Joystick
The attendant controls the speed and driving direction in a driving profile (e.g."Drive") with the joystick (see
page59).
If the control device is in "Seating" mode, the seat option can be adjusted by moving the joystick forward/back
ward (see page77) or switched to the next seat option by moving it left/right.
[Activate/Deactivate Attendant Control] button
The attendant uses this button to assume the control functions from the control panel. By pressing the button
again, the attendant returns the control functions to the control panel. The current state is shown by an LED indic
ator.
After the attendant control has been switched on, the LCD screen on the control panel or the separate LCD monit
or shows the following information:
Display Information
Attendant control active
[Attendant control active] LED display
The green LED lights up when the attendant control is activated and the power wheelchair control panel is deactiv
ated.
86
Use
490E75=1_C

Otto Bock 490E75 1 C Series Specifications

General

Brand	Otto Bock
Model	490E75 1 C Series
Category	Wheelchair
Language	English