59
With an anatomically shaped rigid back plate made of
aluminium, the back system enables the best possible
positioning.
Large openings in the back shells provide for a low
weight and easy handling.
Detailed information regarding use, cleaning and main
tenance can be found in the included instructions for
use.
7.10.6 Seat cushion
INFORMATION
► Please note that Ottobock has delivered this power wheelchair without a seat cushion as per the order.
► Please note that you have received a seat cushion or seating system that is not included in Ottobock's modu
lar system. Ottobock assumes no liability for combinations with accessories from other manufacturers not
included in Ottobock's modular system.
► Prior to using the seat cushion or seating system, please read and observe the instructions for use / manufac
turer's instructions from the other manufacturer. These are included with the instructions for use.
► In case of questions or problems with this accessory, please contact the qualified personnel who adjusted this
product.
This power wheelchair was ordered and delivered with a seat cushion.
Wheelchair seat cushions are used for pressure redistribution while sitting. Depending on the version, the seat
cushion contains a resilient foam base and possibly additional gel or air-filled inserts. The foam base is anatomic
ally shaped in some cases.
The covers and breathable materials reduce shear forces and ensure a high level of seating comfort for the user.
The seat cushion can be removed for cleaning. Following cleaning, the seat cushion is secured to the seat by a
hook-and-loop fastener to prevent sliding.
Detailed information regarding use, cleaning and maintenance can be found in the enclosed instructions for use for
the seat cushion.
7.10.7 Mounting kit for head/neckrests
60
The mounting kit is used to install head/neckrests. It is
mounted to the back frame by means of an adapter.
Detailed information regarding use, maintenance and
repair can be found in the included instructions for use.
7.10.8 Headrest
The head support or head/neckrest stabilises and guides the user's head. It has been mounted to the mounting kit
for head/neckrests by qualified personnel.
Detailed information regarding use, maintenance and repair can be found in the included instructions for use.
72
Use
490E75=1_C
To Next Page
Loading...
Need help?
General
