Display Information
when a brief joystick command is executed in the opposite direction; the wheelchair
stops when the joystick is moved more than 50%in the opposite direction
Message window with various information notices (see symbols below)
Message in message window: The control device has to be restarted (symbol
flashing)
Message in message window: Configuration in progress, please wait
Message in message window: Drive-away lock (see page61)
Message in message window: Sleep symbol (control device is about to switch to
sleep mode)
Message in message window: These symbols will be displayed during configura
tion processes
Tick: Process successful
Cross: Process not successful
Message in message window: "Stop button" in latched drive mode (cruise con
trol); the wheelchair brakes when a brief joystick command is executed in the oppos
ite direction; the wheelchair stops when the joystick is moved more than 50%in the
opposite direction
Message in message window: Error messages (see page107)
Further LCD screen functions
Further LCD screen symbols are described in the following sections:
• Section "Selecting the speed levels" (see page58)
• Section "Drive-away lock" (see page61)
• Section "Troubleshooting" (see page106)
• Section "Power seat functions" (see page73)
7.6.2.3 Adjustment possibilities
The user can change settings on the display:
33490E75=1_C
Use
To Next Page
Loading...
Need help?
General
