38
11 Restricted speed (creep speed/drive-away lock)
User menu
INFORMATION
The scenario for standard programming is described below. The sequence of the sub-items can be varied indi
vidually by the qualified personnel.
The display shown above appears on the LCD screen of the TEN°LCD module after it is switched on.
After pressing a connected user switch for the first time, the User Menu is displayed. Alternatively the User Menu
appears automatically after a programmed time interval.
The User Menu is a kind of "control centre" when the TEN°LCD module is used. Modes or submenus can be
selected from here, the lights and horn can be operated, and settings can be configured. The functions and sub-
functions are selected by moving to the right in the menus or scrolling up and down.
Scroll left/right or up and down in the menus using the respective installed input devices (e.g.joystick, navigation
buttons on the TEN°LCD module, special control input devices).
Depending on the programming, the User Menu can offer the following functions:
Display Function
"Drive" > When selected, the control device switches to the
"Drive" screen within the currently selected profile.
"Profile" <x> Establishes the profile that is used the next time the
"Drive" screen is opened.
"Seating" > When selected, the control device switches to the dis
played mode. This mode enables operation of the power
seat functions delivered with the power wheelchair.
"Speed level" <x> When selected, the speed level can be selected
(e.g.speed level 1–5). The higher the speed level, the
higher the speed.
"Horn" When selected, the horn sounds.
"Speed Adjust" <x> When selected, the speed level can be selected
(e.g.speed level 1–5). The higher the speed level, the
higher the speed.
"Mode x1" ... > Depending on the programming, all available system
modes can be shown in the list of the User Menu with
their own entry, e.g."Bluetooth Device" mode
("Bluetooth"), "IR Menu" mode ("Remote Control").
When selected, the control device switches to the dis
played mode.
"Sleep" > When selected, the control device switches to sleep
mode.
"Lights" > The lights or direction indicators can be turned on or off
from here.
"Exit" > Select to exit the User Menu. The "Drive" screen
appears within the currently selected profile.
"Settings" >
41490E75=1_C
Use
To Next Page
Loading...
Need help?
General
