Otto Bock 490E75 1 C Series User Manual

51
Charging process via the control panel
1) Turn the control device on the power wheelchair off.
2) Plug the battery charger plug into the charging
receptacle on the power wheelchair control panel.
INFORMATION: Please note that charging via
the charging receptacle on the control panel
may only be carried out at a current of maxim
um 10A.
3) Connect the battery charger to the mains socket.
→ The charging process starts automatically and
the battery charge level is indicated by the LCD
screen on the control panel and on the battery
charger.
4) Turn the battery charger off and pull the plug out of
the mains socket when the charging process is
complete.
5) Disconnect the battery charger plug from the con
trol panel.
6) Turn the power wheelchair control device on. The
power wheelchair is ready to be used.
52
Charging process via the control panel
1) Turn the control unit on the power wheelchair off.
2) Plug the battery charger plug into the charging
receptacle on the power wheelchair control panel.
INFORMATION: Please note that charging via
the charging receptacle on the control panel
may only be carried out at a current of maxim
um 10A.
3) Connect the battery charger to the mains socket.
→ The charging process starts automatically and
the battery charge level is indicated by the LCD
screen on the control panel and on the battery
charger.
4) Turn the battery charger off and pull the plug out of
the mains socket when the charging process is
complete.
5) Disconnect the battery charger plug from the con
trol panel.
6) Turn the power wheelchair control unit on. The
power wheelchair is ready to use.
53
Charging process via the control panel
1) Turn the control unit on the power wheelchair off.
2) Plug the battery charger plug into the charging
receptacle on the power wheelchair control panel.
INFORMATION: Please note that charging via
the charging receptacle on the control panel
may only be carried out at a current of maxim
um 10A.
3) Connect the battery charger to the mains socket.
→ The charging process starts automatically and
the battery charge level is indicated by the LCD
screen on the control panel and on the battery
charger.
4) Turn the battery charger off and pull the plug out of
the mains socket when the charging process is
complete.
68
Use
490E75=1_C

Otto Bock 490E75 1 C Series Specifications

General

Brand	Otto Bock
Model	490E75 1 C Series
Category	Wheelchair
Language	English