Oxford Technical Solutions Ltd Page 89 of 110
Figure 47: NAVconfig improve configuration select settings
Select the settings that you wish to improve in the configuration from the options available. By clicking the
down arrows, you can expand the settings and view the values that have been improved after the warm-up. It
is recommended that you review these before clicking ‘Next’ to continue.
The final stage of the improved settings wizard is to write the configuration to the device and apply the
improved settings with new accuracies. You can choose whether to commit the improved settings to the device
after a rest or power cycle (recommended) or to apply them immediately (which does not get saved into the
configuration file on the device). For the improved settings to apply to the device in the case where the device
will remain in the car for some time, it is recommended that you apply the improved settings and reset the
device.
To Next Page
Loading...
General