Pacific Power Source ADF Series - System Remote Access Commands

ADF SERIES™ OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright  2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual Page 239 of 349
8.9.12 System Remote Access Commands
Command Syntax
SYSTem:REMote:ACCESS
Description
Sets remote access permission.
Parameters
<0 | DISABLED | 1 | ENABLED>
Parameter Format
<b>
Example
SYST:REM:ACCESS 1
Query Format
SYSTem:REMote:ACCESS?
Returned Data Format
<cr>
Query Example
SYST:REM:ACCESS?
1
Command Syntax
SYSTem:REMote:ACCESS:REQuest
Description
This commands results in a pop up dialog on the front panel display
requesting the local user to ACCEPT. Confirms presence of a person
at the location of the instrument.
Parameters
Alias name. (This argument is optional)
Parameter Format
<cr>
Example
SYSTem:REMote:ACCESS:REQuest
Query Format
None
Command Syntax
SYSTem:REMote:ACCESS:LOGIN
Description
This command uses a password as an argument to request access to
the instrument. The password can be set on the front panel or using
the SYSTem:REMote:PASSword command
Parameters
Password
Parameter Format
<nr1>
Example
SYSTem:REMote:ACCESS:LOGIN 1234
Query Format
None