ADF SERIES™ OPERATION MANUAL
SECTION 10:
LAN Interface Configuration
Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual Page 287 of 349
10.7.3 Program Memory
Program settings and transients can be stored in a number of different memory types. The
Program Memory screen allows the user to manage available stored programs. The program to
be recalled on power up can be selected at the bottom of this screen in the “POWER ON
PROGRAM” area.
Note that external storage devices may be selected under “STORED PROGRAMS” using the
MEMORY drop down list control.
To Next Page
