ADF SERIES™ OPERATION MANUAL
SECTION 10:
LAN Interface Configuration
Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual Page 313 of 349
10.10.13 Firmware Update
The Firmware update screen can be used to install new firmware for a file. New firmware may
be distributed by email or from Pacific’s FTP site. Note that the OUTPUT of the unit must be OFF
to perform a firmware update.
If you received a firmware image file (.img extension):
• Use the button to select it from the drive location you saved it to.
• Then use the button to upload new firmware to the power source.
To install new firmware from the Pacific Power FTP server:
• Click the button.
To Next Page
