ADF SERIES™ OPERATION MANUAL
SECTION 6:
Front Panel Operation
Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual Page 85 of 349
6.3 Menu Keys
The various menus and settings available to the user from the front panel are detailed in this
section of the manual.
All available menus can be accessed using the Menu keys to the left of the LCD display. The
following five keys are available.
PROG PROGRAM
Programming of output parameters and
Measurements read back
MEAS MEASUREMENTS Measurements
TRAN N/A Not used on ADF Series models
CONF CONFIGURATION Configuration Screens
SYST SYSTEM
System Settings, Interface Configuration
and Calibration
Table 6-1: Available Menu Keys
Following sections cover each aspect of the front panel screen and parameters in more
detail.
To Next Page
Loading...
