Chapter 13 Using Palm™ VersaMail™ Personal E-mail Software
150
7. (Optional) Tap Get Mail. You should perform a manual get mail after setting up
a scheduled auto get. This ensures that only new messages are retrieved during
auto get.
TIP
Alternately, if you have configured an e-mail account to synchronize
messages between your handheld and your desktop, you can perform a HotSync
operation after setting up a scheduled auto get to ensure that only new messages
will be retrieved during auto get. See “Synchronizing e-mail between the
handheld and the desktop” later in this chapter for configuration information.
Auto get notifications
The auto get mail feature provides three types of alerts during and after message
retrieval:
■ Depending on the connection type, a series of status messages may appear
during the auto get connection and mail retrieval process.
■ You can choose to have your handheld alert you when a new message arrives in
your account. The beep or alert sound your hear is called a notification. Your
handheld also notifies you of a new message’s arrival by blinking an indicator light
or vibrating if certain preferences are selected. For more information, see “Making
your handheld buzz or blink when you get new e-mail” later in this chapter.
NOTE
You must select the Notification option to have your handheld notify
you when new messages are received. See the next section, “Setting
notification options,” for more information.
■ If auto get discovers and downloads new messages for an e-mail account, a
notification appears on the Reminders screen, displaying the account name and
the number of new messages. If auto get is scheduled for more than one
account, a separate notification appears for each account. See “Viewing and
using the Reminders screen” later in this chapter.
To Next Page
Loading...
Need help?
General
