– [SMTP authentication]: Select this option if the outgoing E-mail server requires SMTP authentication
when sending E-mail messages. The following settings are also necessary. Enter the settings as you
would for sending E-mail.
a. Enter the login ID
*2
(user name) required to access the server (max. 63 characters).
b. Enter the password
*2
required to access the server (max. 63 characters).
• The camera supports LOGIN, PLAIN, and CRAM-MD5 authentication.
3. Under [SSL], select [Use] if you want to use SSL encryption when sending E-mail.
• When [Use] is selected, the port number under [E-mail Transfer] may need to be set to 465. Ask your
ISP or network administrator for the appropriate settings.
• SSL supports SMTP over SSL. STARTTLS is not supported.
4. Click [Save], then click [Go to Trigger page].
*1
[Space], ["], ['], [&], [<], and [>] cannot be entered.
*2
["] cannot be entered.
Operating Instructions 71
2.5.1 Sending Trigger Notifications by E-mail
To Next Page
Loading...
