Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-67
Table 5-6. Text Message Replies
Operation
To make an OHVA :
To answer an OHVA:
To transfer a call using OHVA:
Message No. Message Text Message No. Message Text
1 Take A Message 6 User Defined
2 Please Hold 7 User Defined
3 Will Call Back 8 User Defined
4 Transfer 9 User Defined
5 Unavailable 0 User Defined
Action Result
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number. Busy signal
3. Enter the OHVA feature access code (default = 8).• OHVA EXT XXX displays if busy
extension called (where XXX = calling
extension.
• EXT LED flashes
4. Make your announcement
Action Result
1. Press the OHVA Split key.
Note: You must program an FF key as a split key (default =
*71) to use this feature.
Split key flashes red
2. To return to the previous call, press the Split key again. The OHVA originating party receives
Busy signal.
Action Result
1. Press the HOLD key to put the current call on hold. Current call on hold
2. Dial the extension number to which the call is being trans-
ferred.
Busy signal
To Next Page
Loading...
