Panasonic FP3

FP3 MEWNET-TR
Chapter2-3. Page.26
22
3. Expansion FP I/O Terminal Units
1) Parts terminology
J
8-input type (AFP87425) and 8-output type (AFP87427)
1
Expansion connector
1
Expansion connector
2
Input or output indicators (LED)
3
Power supply terminal
(24 V DC)
4
Input or output terminal
DIN rail attachment lever
5
Frame ground terminal (F.G.)
J
16-input type (AFP87426) and 16-output type (AFP87428)
1
Expansion connector
1
Expansion connector
2
Input or output indicators
(LED)
3
Power supply terminal
(24 V DC)
4
Input or output terminal
DINrail attachmentlevers
5
Frame ground terminal
(F.G.)
1
Expansion connector:
Connects to FP I/O transmitter unit using expansion cable.
2
Input or output indicators (LED):
Input type: Indicate the input ON/OFF states.
Output type: Indicate the output ON/OFF states.
<Example: 8-input/output type>
LEDs
+
24V
01234567
3
Power supply terminal (24 V DC):
Supplies 24 V DC.
4
Input or output terminal:
Input type: Connects to input field devices (e.g., limit switches).
Output type: Connects to output field devices (e.g., LEDs).
5
Frame ground terminal (F.G.):
This terminal is used for grounding.
2-3. Slave Stations