Panasonic FP3

FP3 MEWNET-TR
Chapter3-2. Page.50
46
5. Slave Station Expansion
1) Connecting a slave station and an expansion unit
x Use an expansion cable to connect the FP I/O transmitter unit and expansion FP I/O terminal unit.
Expansion cable
FP I/O transmitter unit
Expansion
connector
Type Part number
8 cm/3.150 in.
APL2510
28 cm/11.024 in.
APL2511
48 cm/18.898 in.
APL2515
Expansion FP I/O terminal unit
2) Connecting method
x Only one expansion FP I/O terminal unit can be connected to one FP I/O transmitter unit (8- or 1 6-point type).
Note:
x
The 4-point FP I/O transmitter unit cannot be connected with the expansion FP I/O terminal unit.
<Example 1>
Expansion cable
FP I/O transmitter unit Expansion FP I/O
terminal unit
<Example 2>
Expansion
cable
FP I/O transmitter unit
Expansion FP I/O
terminal unit
3-2. Wiring