To make/answer a conference group call
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
Talk.
Dial conference
group number
(1 digit).
Enter 32.
Wait for an
answer.
conference
group no.
3 2
C.Tone
Any Telephone
Caller
The telephone
rings.
Off-hook.
Called Party
Talk.
A multiple party
conversation
is now established.
Enter entry code
(max. 8 digits).
entry code
*
Enter #.
• * If you do not enter an entry code when making the conference group call, extensions/
outside telephones can join the conversation without needing to enter an entry code.
• Entry codes can consist of the digits "0" through "9". When " " is used as an entry code, no
one can join a conversation that is already in progress. " " must be used by itself (i.e., you
may not combine it with numeric digits). For details, refer to " Join After Time Out".
• A conversation can be established with a maximum of 8 parties (including the caller).
• If the Hands-free Answerback feature is enabled, the called extension can answer the
conference group call without going off-hook. KX-UT series SIP phones do not support the
Hands-free Answerback feature for a conference group call.
• With PTs and KX-WT125 (Canada only)/KX-TCA175/KX-TCA275/KX-TCA185/KX-
TCA285/KX-TCA385 PSs, a conference group call can be automatically answered without
going off-hook. This mode is selected through system programming.
• If using an SLT, SIP phone, or S-PS, the caller can only originate a conference group call
and cannot control the called parties’ call status manually.
For a caller
To end a conversation with a specific party
1.7.3 Making a Conference Group Call
Operating Manual 113
To Next Page
Loading...
