Panasonic KX-NS1000 - If a Voice Processing System Is Connected

<Example> To hold the current call and then talk to the new party
PT/PS/KX-UT series/S-PS
SLT
Enter desired
service code.
desired service
code
Enter desired
service code.
Press Recall/
hookswitch.
Press FLASH/RECALL or EFA.
Or press TRANSFER and
then enter 60.
During a conversation with an outside party During a conversation with an outside party
Enter 60.
OR
(EFA)
6 0
desired service
code
6 0
OR
For KX-UT series or S-PS,
press FLASH/RECALL.
• In this case, the FLASH/RECALL button on a proprietary telephone, KX-UT series SIP
phone, or S-PS must be set to External Feature Access (EFA) mode through system
programming.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit an External Feature Access (EFA) button.
1.11.5 If a Voice Processing System is Connected
You or an outside party can access the Voice Processing System from a telephone.
– Call Forwarding to Voice Mail (Voice Mail Integration)
If your PBX has a Panasonic Voice Processing System connected (e.g., KX-TVM series) using digital
integration, the following features are also available:
– Screening Calls (Live Call Screening [LCS])
– Recording a Conversation
• Voice Processing System features are not available for SIP phone and S-PS users.
Call Forwarding to Voice Mail (Voice Mail Integration)
– To forward your calls to your mailbox
– To transfer a call to a mailbox
– To listen to messages
If you cannot answer calls, you can forward them to your mailbox. You can select the type of incoming calls
(Intercom Calls/Outside Calls/Both Calls) that are forwarded.
1.11.5 If a Voice Processing System is Connected
202 Operating Manual