Features Default Setting
Manual Call Waiting—Intercom Calls Off (No call/No tone)
Call Waiting Tone Type Selection Tone 1
Absent Message Off
Personal Absent Message Cleared
Call Forwarding (FWD)/Do Not Disturb (DND)—Intercom/Outside
Calls
Off
FWD N/A Timer 15 seconds
Call Pickup Deny Allow
Headset Operation Headset off
Executive Busy Override Deny Allow
Paging Deny Allow
Key Pad Tone Set On
Background Music (BGM) Off
Data Line Security Off
Connected Line Identification Restriction [COLR] Allow
Log-in/Log-out Log-in
Message Waiting Off
Timed Reminder Cleared
To change the above features back to their default settings
Press PROGRAM
or PAUSE.
Enter ##.
Press PROGRAM
or PAUSE.
Press ENTER
or STORE.
Press ENTER
or STORE.
OR
OR
PROG.
PAUSE
OR
PROG.
PAUSE
OR
• If you do not desire that the Call Waiting, FWD/DND or Hot Line to be cleared by this
feature, please ask your dealer.
3.1.3 Customising the Buttons
You can customise the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons.
3.1.3 Customising the Buttons
Operating Manual 287
To Next Page
Loading...
