1.9.6 Preventing Your Number Being Displayed on the Called
Party’s Telephone (Calling Line Identification Restriction [CLIR])
When making an outside call, you can select whether the called party can see your telephone number or
not.
To show/prevent
On-hook.Off-hook.
PT/SLT/PS/SIP Extn./S-PS
Enter 7 1.
Show
Prevent
0
1
OR
17
Enter 0 to show
or 1 to prevent.
C.Tone
• You can change the mode by pressing a preset CLIR button while on-hook (There is no
CLIR button on KX-UT series SIP phones).
The CLIR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
• Availability of this feature depends on the ISDN service of your telephone company.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a Calling Line Identification Restriction (CLIR) button.
1.9.7 Preventing Other People from Joining Your Conversation
(Executive Busy Override Deny)
Off-hook.
On-hook.
Enter 1 to prevent
or 0 to allow.
Prevent
Allow
1
0
OR
Enter 733.
3 37
C.Tone
PT/SLT/PS/SIP Extn./S-PS
• Some extensions may be prohibited from performing this feature.
1.9.6 Preventing Your Number Being Displayed on the Called Party’s Telephone (Calling Line Identification
Restriction [CLIR])
Operating Manual 187
To Next Page
Loading...
