Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a Cleaned-up button.
1.12.2 Recording Information Using Preprogrammed Messages
(Printing Message)
You can record a variety of information from your extension using up to 8 preprogrammed messages.
Message information from all extensions is recorded with the PBX. For example, it is possible to use this
feature as a time card by selecting preprogrammed "sign in" and "sign out" messages.
In a hotel-type environment, this feature can be used to record room information from a room extension.
For a list of preprogrammed messages, consult your dealer.
To record
Off-hook.
On-hook.
Enter 761. Enter message
number (1–8).
Enter parameter
if required.
PT/SLT
parameter
Enter #.
7 6 1
message no.
C.Tone
*
• * Depending on the content of the selected message, you may be required to enter a
numeric parameter, such as a price or time. Enter the correct number of characters as
required for the message. For information about required parameters, consult your dealer.
<Example>
If "Snack %%.%%" has been programmed as message number 1 (for recording charges for
room snacks consumed), hotel employees would enter data as in the example below using
the room extension:
761 1 0300 #
message no.
parameter
(Snack charge)
• When a preprogrammed message is selected, detailed information is recorded
automatically, as shown below:
Date Time Ext CO Dial Number
10:45AM
1234 Snack 03.00
02/02/00
• Any charges recorded here are not related to charges that the hotel operator records when
checking out a room.
1.12.2 Recording Information Using Preprogrammed Messages (Printing Message)
Operating Manual 215
To Next Page
Loading...
