4.1 Manager Programming
4.1.1 Programming Information
The manager can programme the following items.
• Call Charges
• Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (2 lines or more)
(e.g., KX-NT343, KX-NT546, KX-DT346, KX-DT546, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)
CAUTION
• The PBX has a default password preset. For security, change the password the first time that you
programme the PBX.
• It is strongly recommended that a password of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in the
password, refer to " Entering Characters".
• To avoid unauthorised access to the PBX, keep the password secret. If it becomes known to others,
the PBX may be misused.
• Change the password periodically.
Conditions
The programming extension must be idle, on-hook and holding no calls.
4.1.2 Manager Programming
Changing Call Charges and Extension Control
Follow
programming
input.
To exit
To programme
To enter the programming mode
manager
password
Press
HOLD.
Press PROGRAM
or PAUSE.
1
Enter 1. Press PROGRAM
or PAUSE.
To continue
programming
input
Enter manager
password.
OR
PROG.
PAUSE
OR
PROG.
PAUSE
Item Programming Input
Changing the manager password.
+ + Password (max. 10 digits) +
4.1 Manager Programming
322 Operating Manual
To Next Page
Loading...
