Panasonic KX-NS1000 - Using Your PS or S-PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode); Using Your Phone in Parallel with a Wired Telephone (One-Numbered Extension)

1.9.12 Using Your PS or S-PS in Parallel with a Wired Telephone
(Wireless XDP Parallel Mode)
Your PS or S-PS can be used in parallel with a PT, SLT, or SIP phone.
When in this mode, incoming calls to a wired telephone also ring the paired PS or S-PS.
To set
Enter extension number
of the paired telephone.
Press CANCEL.
PS/S-PS
extension no.
Press TALK.
Enter 48.
4 8 1
C.Tone
Enter 1.
To cancel
PSPS/S-PS
Press CANCEL.
Press TALK.
Enter 48.
4 8 0
C.Tone
Enter 0.
• Some wired telephones are prohibited from using this feature.
• If you go off-hook while your parallelled telephone is in use, the call will switch over to
you (except SIP phones and S-PSs).
1.9.13 Using Your phone in Parallel with a Wired Telephone
(One-numbered extension)
Two telephones connected to the KX-NS1000 can be set to share 1 extension number, and both telephones
can be set to ring (One-numbered Extension feature). You can choose whether the sub extension
associated with the main extension will ring when an incoming call is received.
To set
Enter extension number
of the paired telephone.
phone no.extension no.
Enter 48.
4 8 1
C.Tone
Enter 1.
PT/SLT/SIP Extn.
Off-hook.
On-hook.
1.9.12 Using Your PS or S-PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
190 Operating Manual