1.2.6 Alternating the Calling Method (Alternate Calling—Ring/
Voice)
The caller can alternate the alerting method, either ring or
voice, when making an intercom call.
On the other hand, any extension can set the alerting
method, either ring or voice, when receiving an intercom
call.
Ringing (Default): You can call the other party with a ring
tone.
Voice-calling: You can talk to the other party immediately
after confirmation tone.
To change the method
After dialling
Enter .
PT/SLT/PS
Talk.
C.Tone
• Voice-calling from a SIP extension is not available.
• If the called party uses a SIP extension, single line telephone (SLT) or portable station (PS),
Voice-calling is not available.
• This feature is not available when the called party’s telephone is in the Voice Call Deny
mode.
Customising Your Phone
• 3.1.2 Settings on the Programming Mode —Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party’s voice.
1.2.7 Calling without Restrictions
– Using Your Calling Privileges at Another Extension (Remote COS Access)
Using Your Calling Privileges at Another Extension (Remote COS Access)
You can use your calling privileges (Class of Service) at another extension. You may override restrictions
which have been set. To use this feature, an original extension number and an extension PIN (Personal
Identification Number) are required. You can make a call by entering a verification code and verification
code PIN.
1.2.6 Alternating the Calling Method (Alternate Calling—Ring/Voice)
Operating Manual 47
To Next Page
Loading...
