To delete Caller ID numbers and recorded names
PT/SLT/PS/SIP Extn./S-PS
Enter 453.
On-hook.
Log in to your mailbox.
5 34
Delete one number.
OR
1
2
Enter 1 or 2.
Delete the announced number.
Keep the number and
announce the next number,
then repeat this step.
OR
1
2
Enter 1 or 2.
When finished, go on-hook.
On-hook.
Delete all numbers,
then go on-hook to finish.
• The number of callers you can assign for this feature is controlled by the System
Administrator.
Live Call Screening (LCS)
While a caller is leaving a message in your mailbox, you can monitor the call without
answering. If you so desire, you can answer the call while monitoring. There are two
methods available (Default: Hands-free mode).
Hands-free mode:
You can monitor the message automatically, live through the telephone speaker.
Private mode:
You will hear an alarm tone while the caller is leaving a message.
Before operating
• Create a Live Call Screening (LCS) button (Personal Programming).
• Select the mode, either Hands-free or Private (Personal Programming).
• Set the extension PIN (Personal Identification Number).
• Set the Live Call Screening feature.
To set Live Call Screening
Press Live Call
Screening.
Enter extension PIN
(max. 10 digits).
extension PIN
PT/PS
(Live Call
Screening)
PIN: Personal Identification Number
This is required only when
an extension PIN is stored.
1.8.6 Other Features
166 Operating Manual
To Next Page
Loading...
