2. The Mailbox Settings box appears.
The following items are editable.
Mailbox Parameters
Item Description
Mailbox Password Specifies the password needed to access the mailbox. If a default
password is programmed by an administrator, that password will be
assigned automatically when creating all mailboxes.
To change a password for a mailbox:
1.
Click Edit.
2.
In the window that appears, enter the new password (4–16
characters in length) and then enter it again to confirm it.
3.
Click OK
Mailbox Password (Message
Client)
Specifies the password needed to access the mailbox when using a
client software program. If a default password is programmed by an
administrator, that password will be assigned automatically when
creating all mailboxes.
To change a password for a mailbox:
1.
Click Edit.
2.
In the window that appears, enter the new password (4–16
characters in length) and then enter it again to confirm it.
3.
Click OK.
Covering Extension Enter a desired extension number you want to assign for transferring to
your Covering Extension in the box (1–8 digits).
Interview Mailbox Enter an interview mailbox number you want to assign for your mailbox
in the box (2–8 digits [the maximum number of digits may be less than
8, depending on system programming]).
All Calls Transfer to Mailbox Select Yes or No.
If Yes is selected, calls are automatically forwarded to your mailbox.
3.2.1 User Programming
Operating Manual 297
To Next Page
Loading...
