Panasonic KX-NS1000 - 4.3.1.3 FWD;Call Transfer;Intercept Routing to the TIE Line

When setting the features or programming
Confirmation Tones
Tone 1
• The feature setting was set
successfully.
• A call is received in Voice-calling
mode.
1 s
Tone 2
• Before receiving a page through
an external speaker
• You receive a call in Hands-free
mode.
• You established a call with a
KX-UT series SIP phone that has
Hands-free Answerback
enabled.
1 s
Tone 3
• Before the following features
activate:
– Retrieving a held call
– Picking up another call
– Paging/Answering a paging
announcement
– Answering the call through a
speaker
• You establish a call with an
extension in the following cases:
– The called extension has
hands-free Answerback
enabled and is not a KX-UT
series SIP phone.
– Voice-calling mode
• When making a call to or from a
doorphone.
1 s
Tone 4
Establishing or leaving a
conference
1 s
Tone 5
A call has been put on hold.
1 s
5.4.1 What is This Tone?
360 Operating Manual