[Example]
To use an account code (Account Code Entry)
PT/SLT/PS/SIP Extn./S-PS
Enter #.
Off-hook.
account code
Enter account code
(max. 10 digits).
Press Account or
enter 49.
Dial outside
phone number.
outside
phone no.
Seize an outside line before
entering an outside phone number.
OR
94
(Account)
D.Tone
SIP phone or S-PS users
will not hear this tone.
For KX-UT series SIP phone and S-PS users
a. Operations that use feature numbers are limited. Also, flexible buttons are only available for S-PSs and
certain KX-UT series SIP phone models. Refer to the telephone types displayed at the top left of each
operation. However, for KX-UT series SIP phones, a tone may be heard depending on the system
settings. For details, consult your administrator.
b. A maximum of 32 digits can be input on a KX-UT series SIP phone at one time, including feature
numbers, etc.
c. To execute certain operations, you may be required to press the ENTER button on a KX-UT series SIP
phone or the CALL button (soft button) on an S-PS during the operation.
The following 5 operations are examples.
[Examples]
To select an idle outside line automatically
PT/SLT/PS/SIP Extn./S-PS
Off-hook. Talk.
Dial outside phone
number.
Press L-CO or
enter automatic
line access number.
OR
0 9
(L-CO)
/
outside
phone no.
For KX-UT series:
Press
ENTER.
OR
For S-PS:
Press
CALL.
Feature Highlights
6 Operating Manual
To Next Page
Loading...
