Panasonic KX-TDA30

2.4 Installation of the Trunk Cards — KX-TDA100/KX-TDA200
100 Installation Manual
Pin Assignments
RJ45 Connector (10BASE-T)
LED Indications
No. Signal Name Input (I)/Output (O) Function
1 TPO+ O Transmit data+
2 TPO- O Transmit data-
3 TPI+ I Receive data+
4-5 Reserved ––
6 TPI- I Receive data-
7-8 Reserved ––
Indication Colour Description
CARD
STATUS
Green/
Red
Card status indication
• OFF: Power Off
• Green ON: Normal (all ports are idle)
• Green Flashing (60 times per minute): Normal (a port is in use)
• Red ON: Fault (includes reset)
• Red Flashing (60 times per minute): Out of Service
ONLINE Green On-line status indication
• ON: On-line mode
• Flashing: Emergency maintenance mode
ALARM Red Alarm indication
• OFF: Normal
• ON: Alarm
IAM BUSY Green Busy status indication
• OFF: Not used
• ON: At least one line is used
LINK Green Link status indication
• OFF: Connection error
• ON: Normal connection
DATA Green Data transmission indication
• OFF: No data transmitted
• ON: Data transmitting
COL Green Data collision indication
• OFF: No data collision
• ON: Data collision
8
1